Monomeric and fully endcapped Bio-C4 packing is bonded with butyl groups that lead to moderate hydrophobicity. Bio-C4 packings of 300 Å pore size selection are ideal for high resolution mapping of peptides and separation of intact proteins, and natural and synthetic peptides.
Silica:
Sperical, high purity (<10 ppm metals)
Pore size:
300 Å
Particle size:
3, 5, and 10 µm
Pore volume:
1.0 ml/g
Surface area:
105 m²/g
Phase structure:
Monomeric and fully endcapped
% Carbon:
3.0%
Very well controlled chemistry of monolayer formation and end-capping
High column-to-column reproducibility
High selectivity and high efficiency for separations
Full coverage bonded silica packing for high stability
Suitable for separations of proteins, peptides, and pharmaceuticals
[1] Guard column [2] Guard Cartridge only. [3] Guard Cartridge with holder. [4] One-piece PEEK coupler, recommended to connect columns in series. [5] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [6] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [7] 0.5 µm PEEK frit for column with particle size 3 µm or less [8] For Precolumn Filter (0.5 µm) 5 units/pk
[1] Guard column [2] Guard Cartridge only. [3] Guard Cartridge with holder. [4] One-piece PEEK coupler, recommended to connect columns in series. [5] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [6] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [7] 2 µm PEEK frit for column with particle size 5 µm and 10 µm. [8] Intended for use with column IDs ≥ 21.2 mm [9] For Precolumn Filter (2 µm) 5 units/pk
[1] Guard column [2] One-piece PEEK coupler, recommended to connect columns in series. [3] PEEK/Stainless Steel coupler, recommended to connect columns of IDs > 7.8 mm in series. [4] Column coupler with 10cm length flexible tubing,10-32 fitting with 1/16 OD PEEK tubing. Recommended to connect analytical columns in series [5] 2 µm PEEK frit for column with particle size 5 µm and 10 µm. [6] Intended for use with column IDs ≥ 21.2 mm [7] For Precolumn Filter (2 µm) 5 units/pk
