Sepax HILIC Phases Columns

To solve the challenges of more and more highly polar pharmaceuticals and small biological molecules, Sepax developed a series of chemistries of weak acidic, neutral, and basic stationary phases for separating basic, neutral and acidic compounds of high polarity. Utilizing highest purity and enhanced mechanical stability silica and pure bonding reagents, Sepax HILIC bonded phases have been innovatively and specially designed to ensure maximum surface coverage, resulting in high stability of the stationary phases. The chemistry of monolayer formation is completely controlled that results in very reliable lot-to-lot and column-to-column reproducibility. The uniform, spherical Sepax HILIC particles have a nominal surface area of 300 m²/g with a controlled pore size of 120 Å. Sepax HILIC columns are packed with a proprietary slurry technique to achieve uniform and stable packing bed density for maximum column efficiency.

With the chemical structures shown in figure below, Polar-100 and Polar-Diol are neutral, polar phases, while Polar-Diol is more polar than Polar-100. Polar-Silica is a weak acidic phase. Polar-Pyridine and Polar-Imidazole are basic phases, while Imidazole phase is more basic than Pyridine phase.

• HILIC phases with unique chemistries of acidic, neutral, and basic surfaces
• Ultra-pure silica particles with controlled pore sizes
• Available in particle size of 1.8, 2.2, 3, 5, and 10 µm
• High chemical stability for low leaching
• Available columns with ID in the range of 75 µm to 30 mm and length from 1 to 30 cm
• Available packings from grams to multi-Kilogram
• pH stability: 1.5 - 8.0
• Suitable for separations of polar pharmaceuticals, peptides, amino acids, and other compounds

Separation of Polar Compounds with Polar-100
Separation of nucleosides by various HILIC columns

Sepax Polar-Silica Part Number Particle Size Pore Size ID×Length Price 130001-2103 1.8 µm 120Å 2.1×30mm $415.00 130001-2105 1.8 µm 120Å 2.1×50mm $470.00 130001-2110 1.8 µm 120Å 2.1×100mm $525.00 130001-2115 1.8 µm 120Å 2.1×150mm $545.00 130001-3003 1.8 µm 120Å 3.0×30mm $435.00 130001-3005 1.8 µm 120Å 3.0×50mm $500.00 130001-3010 1.8 µm 120Å 3.0×100mm $545.00 130001-3015 1.8 µm 120Å 3.0×150mm $580.00 130001-4603 1.8 µm 120Å 4.6×30mm $460.00 130001-4605 1.8 µm 120Å 4.6×50mm $515.00 130001-4610 1.8 µm 120Å 4.6×100mm $580.00 130001-4615 1.8 µm 120Å 4.6×150mm $635.00 130002-2103 2.2 µm 120Å 2.1×30mm $415.00 130002-2105 2.2 µm 120Å 2.1×50mm $470.00 130002-2110 2.2 µm 120Å 2.1×100mm $525.00 130002-2115 2.2 µm 120Å 2.1×150mm $545.00 130002-3003 2.2 µm 120Å 3.0×30mm $415.00 130002-3005 2.2 µm 120Å 3.0×50mm $470.00 130002-3010 2.2 µm 120Å 3.0×100mm $525.00 130002-3015 2.2 µm 120Å 3.0×150mm $545.00 130002-4603 2.2 µm 120Å 4.6×30mm $415.00 130002-4605 2.2 µm 120Å 4.6×50mm $470.00 130002-4610 2.2 µm 120Å 4.6×100mm $525.00 130002-4615 2.2 µm 120Å 4.6×150mm $545.00 130003-2001 * 3 µm 120Å 2.0×10mm $165.00 130003-2103 3 µm 120Å 2.1×30mm $350.00 130003-2105 3 µm 120Å 2.1×50mm $350.00 130003-2110 3 µm 120Å 2.1×100mm $435.00 130003-2115 3 µm 120Å 2.1×150mm $480.00 130003-2125 3 µm 120Å 2.1×250mm $525.00 130003-4001 * 3 µm 120Å 4.0×10mm $165.00 130003-4603 3 µm 120Å 4.6×30mm $350.00 130003-4605 3 µm 120Å 4.6×50mm $350.00 130003-4610 3 µm 120Å 4.6×100mm $435.00 130003-4615 3 µm 120Å 4.6×150mm $480.00 130003-4625 3 µm 120Å 4.6×250mm $545.00 130005-2001 * 5 µm 120Å 2.0×10mm $165.00 130005-2103 5 µm 120Å 2.1×30mm $330.00 130005-2105 5 µm 120Å 2.1×50mm $330.00 130005-2110 5 µm 120Å 2.1×100mm $415.00 130005-2115 5 µm 120Å 2.1×150mm $470.00 130005-2125 5 µm 120Å 2.1×250mm $515.00 130005-4001 * 5 µm 120Å 4.0×10mm $165.00 130005-4603 5 µm 120Å 4.6×30mm $330.00 130005-4605 5 µm 120Å 4.6×50mm $330.00 130005-4610 5 µm 120Å 4.6×100mm $435.00 130005-4615 5 µm 120Å 4.6×150mm $480.00 130005-4625 5 µm 120Å 4.6×250mm $525.00 130009-4001 * 10 µm 120Å 4.0×10mm $165.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-2001, $42.50/EA, for 2.0×10mm guard cartridge P/N#: 102000-4001, $42.50/EA, for 4.0×10mm guard cartridge Sepax Polar-100 Part Number Particle Size Pore Size ID×Length Price 131583-2001 * 3 µm 120Å 2.0×10mm $165.00 131583-2103 3 µm 120Å 2.1×30mm $350.00 131583-2105 3 µm 120Å 2.1×50mm $350.00 131583-2110 3 µm 120Å 2.1×100mm $435.00 131583-2115 3 µm 120Å 2.1×150mm $480.00 131583-2125 3 µm 120Å 2.1×250mm $525.00 131583-4001 * 3 µm 120Å 4.0×10mm $165.00 131583-4603 3 µm 120Å 4.6×30mm $350.00 131583-4605 3 µm 120Å 4.6×50mm $350.00 131583-4610 3 µm 120Å 4.6×100mm $435.00 131583-4615 3 µm 120Å 4.6×150mm $480.00 131583-4625 3 µm 120Å 4.6×250mm $545.00 131585-2001 * 5 µm 120Å 2.0×10mm $165.00 131585-2103 5 µm 120Å 2.1×30mm $330.00 131585-2105 5 µm 120Å 2.1×50mm $330.00 131585-2110 5 µm 120Å 2.1×100mm $415.00 131585-2115 5 µm 120Å 2.1×150mm $470.00 131585-2125 5 µm 120Å 2.1×250mm $515.00 131585-4001 * 5 µm 120Å 4.0×10mm $165.00 131585-4603 5 µm 120Å 4.6×30mm $330.00 131585-4605 5 µm 120Å 4.6×50mm $330.00 131585-4610 5 µm 120Å 4.6×100mm $435.00 131585-4615 5 µm 120Å 4.6×150mm $480.00 131585-4625 5 µm 120Å 4.6×250mm $525.00 131589-4001 * 10 µm 120Å 4.0×10mm $165.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-2001, $42.50/EA, for 2.0×10mm guard cartridge P/N#: 102000-4001, $42.50/EA, for 4.0×10mm guard cartridge Sepax Polar-Diol Part Number Particle Size Pore Size ID×Length Price 133331-2103 1.8 µm 120Å 2.1×30mm $415.00 133331-2105 1.8 µm 120Å 2.1×50mm $470.00 133331-2110 1.8 µm 120Å 2.1×100mm $525.00 133331-2115 1.8 µm 120Å 2.1×150mm $545.00 133331-3003 1.8 µm 120Å 3.0×30mm $435.00 133331-3005 1.8 µm 120Å 3.0×50mm $500.00 133331-3010 1.8 µm 120Å 3.0×100mm $545.00 133331-3015 1.8 µm 120Å 3.0×150mm $580.00 133331-4603 1.8 µm 120Å 4.6×30mm $460.00 133331-4605 1.8 µm 120Å 4.6×50mm $515.00 133331-4610 1.8 µm 120Å 4.6×100mm $580.00 133331-4615 1.8 µm 120Å 4.6×150mm $635.00 133332-2103 2.2 µm 120Å 2.1×30mm $415.00 133332-2105 2.2 µm 120Å 2.1×50mm $470.00 133332-2110 2.2 µm 120Å 2.1×100mm $525.00 133332-2115 2.2 µm 120Å 2.1×150mm $545.00 133332-3003 2.2 µm 120Å 3.0×30mm $415.00 133332-3005 2.2 µm 120Å 3.0×50mm $470.00 133332-3010 2.2 µm 120Å 3.0×100mm $525.00 133332-3015 2.2 µm 120Å 3.0×150mm $545.00 133332-4603 2.2 µm 120Å 4.6×30mm $415.00 133332-4605 2.2 µm 120Å 4.6×50mm $470.00 133332-4610 2.2 µm 120Å 4.6×100mm $525.00 133332-4615 2.2 µm 120Å 4.6×150mm $545.00 133333-2001 * 3 µm 120Å 2.0×10mm $165.00 133333-2103 3 µm 120Å 2.1×30mm $350.00 133333-2105 3 µm 120Å 2.1×50mm $350.00 133333-2110 3 µm 120Å 2.1×100mm $435.00 133333-2115 3 µm 120Å 2.1×150mm $480.00 133333-2125 3 µm 120Å 2.1×250mm $525.00 133333-4001 * 3 µm 120Å 4.0×10mm $165.00 133333-4603 3 µm 120Å 4.6×30mm $350.00 133333-4605 3 µm 120Å 4.6×50mm $350.00 133333-4610 3 µm 120Å 4.6×100mm $435.00 133333-4615 3 µm 120Å 4.6×150mm $480.00 133333-4625 3 µm 120Å 4.6×250mm $545.00 133335-2001 * 5 µm 120Å 2.0×10mm $165.00 133335-2103 5 µm 120Å 2.1×30mm $330.00 133335-2105 5 µm 120Å 2.1×50mm $330.00 133335-2110 5 µm 120Å 2.1×100mm $415.00 133335-2115 5 µm 120Å 2.1×150mm $470.00 133335-2125 5 µm 120Å 2.1×250mm $515.00 133335-4001 * 5 µm 120Å 4.0×10mm $165.00 133335-4603 5 µm 120Å 4.6×30mm $330.00 133335-4605 5 µm 120Å 4.6×50mm $330.00 133335-4610 5 µm 120Å 4.6×100mm $435.00 133335-4615 5 µm 120Å 4.6×150mm $480.00 133335-4625 5 µm 120Å 4.6×250mm $525.00 133339-4001 * 10 µm 120Å 4.0×10mm $165.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-2001, $42.50/EA, for 2.0×10mm guard cartridge P/N#: 102000-4001, $42.50/EA, for 4.0×10mm guard cartridge Sepax Polar-Pyridine Part Number Particle Size Pore Size ID×Length Price 134251-2103 1.8 µm 120Å 2.1×30mm $415.00 134251-2105 1.8 µm 120Å 2.1×50mm $470.00 134251-2110 1.8 µm 120Å 2.1×100mm $525.00 134251-2115 1.8 µm 120Å 2.1×150mm $545.00 134251-3003 1.8 µm 120Å 3.0×30mm $435.00 134251-3005 1.8 µm 120Å 3.0×50mm $500.00 134251-3010 1.8 µm 120Å 3.0×100mm $545.00 134251-3015 1.8 µm 120Å 3.0×150mm $580.00 134251-4603 1.8 µm 120Å 4.6×30mm $460.00 134251-4605 1.8 µm 120Å 4.6×50mm $515.00 134251-4610 1.8 µm 120Å 4.6×100mm $580.00 134251-4615 1.8 µm 120Å 4.6×150mm $635.00 134252-2103 2.2 µm 120Å 2.1×30mm $415.00 134252-2105 2.2 µm 120Å 2.1×50mm $470.00 134252-2110 2.2 µm 120Å 2.1×100mm $525.00 134252-2115 2.2 µm 120Å 2.1×150mm $545.00 134252-3003 2.2 µm 120Å 3.0×30mm $415.00 134252-3005 2.2 µm 120Å 3.0×50mm $470.00 134252-3010 2.2 µm 120Å 3.0×100mm $525.00 134252-3015 2.2 µm 120Å 3.0×150mm $545.00 134252-4603 2.2 µm 120Å 4.6×30mm $415.00 134252-4605 2.2 µm 120Å 4.6×50mm $470.00 134252-4610 2.2 µm 120Å 4.6×100mm $525.00 134252-4615 2.2 µm 120Å 4.6×150mm $545.00 134253-2001 * 3 µm 120Å 2.0×10mm $165.00 134253-2103 3 µm 120Å 2.1×30mm $350.00 134253-2105 3 µm 120Å 2.1×50mm $350.00 134253-2110 3 µm 120Å 2.1×100mm $435.00 134253-2115 3 µm 120Å 2.1×150mm $480.00 134253-2125 3 µm 120Å 2.1×250mm $525.00 134253-4001 * 3 µm 120Å 4.0×10mm $165.00 134253-4603 3 µm 120Å 4.6×30mm $350.00 134253-4605 3 µm 120Å 4.6×50mm $350.00 134253-4610 3 µm 120Å 4.6×100mm $435.00 134253-4615 3 µm 120Å 4.6×150mm $480.00 134253-4625 3 µm 120Å 4.6×250mm $545.00 134255-2001 * 5 µm 120Å 2.0×10mm $165.00 134255-2103 5 µm 120Å 2.1×30mm $330.00 134255-2105 5 µm 120Å 2.1×50mm $330.00 134255-2110 5 µm 120Å 2.1×100mm $415.00 134255-2115 5 µm 120Å 2.1×150mm $470.00 134255-2125 5 µm 120Å 2.1×250mm $515.00 134255-4001 * 5 µm 120Å 4.0×10mm $165.00 134255-4603 5 µm 120Å 4.6×30mm $330.00 134255-4605 5 µm 120Å 4.6×50mm $330.00 134255-4610 5 µm 120Å 4.6×100mm $435.00 134255-4615 5 µm 120Å 4.6×150mm $480.00 134255-4625 5 µm 120Å 4.6×250mm $525.00 134259-4001 * 10 µm 120Å 4.0×10mm $165.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-2001, $42.50/EA, for 2.0×10mm guard cartridge P/N#: 102000-4001, $42.50/EA, for 4.0×10mm guard cartridge Sepax Polar-Imidazole Part Number Particle Size Pore Size ID×Length Price 135331-2103 1.8 µm 120Å 2.1×30mm $415.00 135331-2105 1.8 µm 120Å 2.1×50mm $470.00 135331-2110 1.8 µm 120Å 2.1×100mm $525.00 135331-2115 1.8 µm 120Å 2.1×150mm $545.00 135331-3003 1.8 µm 120Å 3.0×30mm $435.00 135331-3005 1.8 µm 120Å 3.0×50mm $500.00 135331-3010 1.8 µm 120Å 3.0×100mm $545.00 135331-3015 1.8 µm 120Å 3.0×150mm $580.00 135331-4603 1.8 µm 120Å 4.6×30mm $460.00 135331-4605 1.8 µm 120Å 4.6×50mm $515.00 135331-4610 1.8 µm 120Å 4.6×100mm $580.00 135331-4615 1.8 µm 120Å 4.6×150mm $635.00 135332-2103 2.2 µm 120Å 2.1×30mm $415.00 135332-2105 2.2 µm 120Å 2.1×50mm $470.00 135332-2110 2.2 µm 120Å 2.1×100mm $525.00 135332-2115 2.2 µm 120Å 2.1×150mm $545.00 135332-3003 2.2 µm 120Å 3.0×30mm $415.00 135332-3005 2.2 µm 120Å 3.0×50mm $470.00 135332-3010 2.2 µm 120Å 3.0×100mm $525.00 135332-3015 2.2 µm 120Å 3.0×150mm $545.00 135332-4603 2.2 µm 120Å 4.6×30mm $415.00 135332-4605 2.2 µm 120Å 4.6×50mm $470.00 135332-4610 2.2 µm 120Å 4.6×100mm $525.00 135332-4615 2.2 µm 120Å 4.6×150mm $545.00 135333-2001 * 3 µm 120Å 2.0×10mm $165.00 135333-2103 3 µm 120Å 2.1×30mm $350.00 135333-2105 3 µm 120Å 2.1×50mm $350.00 135333-2110 3 µm 120Å 2.1×100mm $435.00 135333-2115 3 µm 120Å 2.1×150mm $480.00 135333-2125 3 µm 120Å 2.1×250mm $525.00 135333-4001 * 3 µm 120Å 4.0×10mm $165.00 135333-4603 3 µm 120Å 4.6×30mm $350.00 135333-4605 3 µm 120Å 4.6×50mm $350.00 135333-4610 3 µm 120Å 4.6×100mm $435.00 135333-4615 3 µm 120Å 4.6×150mm $480.00 135333-4625 3 µm 120Å 4.6×250mm $545.00 135335-2001 * 5 µm 120Å 2.0×10mm $165.00 135335-2103 5 µm 120Å 2.1×30mm $330.00 135335-2105 5 µm 120Å 2.1×50mm $330.00 135335-2110 5 µm 120Å 2.1×100mm $415.00 135335-2115 5 µm 120Å 2.1×150mm $470.00 135335-2125 5 µm 120Å 2.1×250mm $515.00 135335-4001 * 5 µm 120Å 4.0×10mm $165.00 135335-4603 5 µm 120Å 4.6×30mm $330.00 135335-4605 5 µm 120Å 4.6×50mm $330.00 135335-4610 5 µm 120Å 4.6×100mm $435.00 135335-4615 5 µm 120Å 4.6×150mm $480.00 135335-4625 5 µm 120Å 4.6×250mm $525.00 135339-4001 * 10 µm 120Å 4.0×10mm $165.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-2001, $42.50/EA, for 2.0×10mm guard cartridge P/N#: 102000-4001, $42.50/EA, for 4.0×10mm guard cartridge Sepax Polar-Silica Part Number Particle Size Pore Size ID×Length Price 130005-7815 5 µm 120Å 7.8×150mm $910.00 130005-7825 5 µm 120Å 7.8×250mm $1,040.00 130005-10015 5 µm 120Å 10.0×150mm $1,045.00 130005-10025 5 µm 120Å 10.0×250mm $1,490.00 130005-21201 * 5 µm 120Å 21.2×10mm $325.00 130005-21205 5 µm 120Å 21.2×50mm $1,515.00 130005-21210 5 µm 120Å 21.2×100mm $2,040.00 130005-21215 5 µm 120Å 21.2×150mm $2,305.00 130005-21225 5 µm 120Å 21.2×250mm $2,920.00 130005-21230 5 µm 120Å 21.2×300mm Inquire 130005-30005 5 µm 120Å 30.0×50mm $2,530.00 130005-30010 5 µm 120Å 30.0×100mm $3,085.00 130005-30015 5 µm 120Å 30.0×150mm $3,910.00 130005-30025 5 µm 120Å 30.0×250mm $5,330.00 130009-7825 10 µm 120Å 7.8×250mm $910.00 130009-10010 10 µm 120Å 10.0×100mm $690.00 130009-10015 10 µm 120Å 10.0×150mm $930.00 130009-10025 10 µm 120Å 10.0×250mm $1,265.00 130009-21201 * 10 µm 120Å 21.2×10mm $305.00 130009-21205 10 µm 120Å 21.2×50mm $1,045.00 130009-21210 10 µm 120Å 21.2×100mm $1,625.00 130009-21215 10 µm 120Å 21.2×150mm $1,865.00 130009-21225 10 µm 120Å 21.2×250mm $2,200.00 130009-21230 10 µm 120Å 21.2×300mm Inquire 130009-30005 10 µm 120Å 30.0×50mm $2,040.00 130009-30010 10 µm 120Å 30.0×100mm $2,475.00 130009-30015 10 µm 120Å 30.0×150mm $3,140.00 130009-30025 10 µm 120Å 30.0×250mm $4,265.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-21201 Price: $175.00/EA (for 21.2×10mm guard cartridge) Sepax Polar-100 Part Number Particle Size Pore Size ID×Length Price 131585-7815 5 µm 120Å 7.8×150mm $910.00 131585-7825 5 µm 120Å 7.8×250mm $1,040.00 131585-10015 5 µm 120Å 10.0×150mm $1,045.00 131585-10025 5 µm 120Å 10.0×250mm $1,490.00 131585-21201 * 5 µm 120Å 21.2×10mm $325.00 131585-21205 5 µm 120Å 21.2×50mm $1,515.00 131585-21210 5 µm 120Å 21.2×100mm $2,040.00 131585-21215 5 µm 120Å 21.2×150mm $2,305.00 131585-21225 5 µm 120Å 21.2×250mm $2,920.00 131585-21230 5 µm 120Å 21.2×300mm Inquire 131585-30005 5 µm 120Å 30.0×50mm $2,530.00 131585-30010 5 µm 120Å 30.0×100mm $3,085.00 131585-30015 5 µm 120Å 30.0×150mm $3,910.00 131585-30025 5 µm 120Å 30.0×250mm $5,330.00 131589-7825 10 µm 120Å 7.8×250mm $910.00 131589-10010 10 µm 120Å 10.0×100mm $690.00 131589-10015 10 µm 120Å 10.0×150mm $930.00 131589-10025 10 µm 120Å 10.0×250mm $1,265.00 131589-21201 * 10 µm 120Å 21.2×10mm $305.00 131589-21205 10 µm 120Å 21.2×50mm $1,045.00 131589-21210 10 µm 120Å 21.2×100mm $1,625.00 131589-21215 10 µm 120Å 21.2×150mm $1,865.00 131589-21225 10 µm 120Å 21.2×250mm $2,200.00 131589-21230 10 µm 120Å 21.2×300mm Inquire 131589-30005 10 µm 120Å 30.0×50mm $2,040.00 131589-30010 10 µm 120Å 30.0×100mm $2,475.00 131589-30015 10 µm 120Å 30.0×150mm $3,140.00 131589-30025 10 µm 120Å 30.0×250mm $4,265.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-21201 Price: $175.00/EA (for 21.2×10mm guard cartridge) Sepax Polar-Diol Part Number Particle Size Pore Size ID×Length Price 133335-7815 5 µm 120Å 7.8×150mm $910.00 133335-7825 5 µm 120Å 7.8×250mm $1,040.00 133335-10015 5 µm 120Å 10.0×150mm $1,045.00 133335-10025 5 µm 120Å 10.0×250mm $1,490.00 133335-21201 * 5 µm 120Å 21.2×10mm $325.00 133335-21205 5 µm 120Å 21.2×50mm $1,515.00 133335-21210 5 µm 120Å 21.2×100mm $2,040.00 133335-21215 5 µm 120Å 21.2×150mm $2,305.00 133335-21225 5 µm 120Å 21.2×250mm $2,920.00 133335-21230 5 µm 120Å 21.2×300mm Inquire 133335-30005 5 µm 120Å 30.0×50mm $2,530.00 133335-30010 5 µm 120Å 30.0×100mm $3,085.00 133335-30015 5 µm 120Å 30.0×150mm $3,910.00 133335-30025 5 µm 120Å 30.0×250mm $5,330.00 133339-7825 10 µm 120Å 7.8×250mm $910.00 133339-10010 10 µm 120Å 10.0×100mm $690.00 133339-10015 10 µm 120Å 10.0×150mm $930.00 133339-10025 10 µm 120Å 10.0×250mm $1,265.00 133339-21201 * 10 µm 120Å 21.2×10mm $305.00 133339-21205 10 µm 120Å 21.2×50mm $1,045.00 133339-21210 10 µm 120Å 21.2×100mm $1,625.00 133339-21215 10 µm 120Å 21.2×150mm $1,865.00 133339-21225 10 µm 120Å 21.2×250mm $2,200.00 133339-21230 10 µm 120Å 21.2×300mm Inquire 133339-30005 10 µm 120Å 30.0×50mm $2,040.00 133339-30010 10 µm 120Å 30.0×100mm $2,475.00 133339-30015 10 µm 120Å 30.0×150mm $3,140.00 133339-30025 10 µm 120Å 30.0×250mm $4,265.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-21201 Price: $175.00/EA (for 21.2×10mm guard cartridge) Sepax Polar-Pyridine Part Number Particle Size Pore Size ID×Length Price 134255-7815 5 µm 120Å 7.8×150mm $910.00 134255-7825 5 µm 120Å 7.8×250mm $1,040.00 134255-10015 5 µm 120Å 10.0×150mm $1,045.00 134255-10025 5 µm 120Å 10.0×250mm $1,490.00 134255-21201 * 5 µm 120Å 21.2×10mm $325.00 134255-21205 5 µm 120Å 21.2×50mm $1,515.00 134255-21210 5 µm 120Å 21.2×100mm $2,040.00 134255-21215 5 µm 120Å 21.2×150mm $2,305.00 134255-21225 5 µm 120Å 21.2×250mm $2,920.00 134255-21230 5 µm 120Å 21.2×300mm Inquire 134255-30005 5 µm 120Å 30.0×50mm $2,530.00 134255-30010 5 µm 120Å 30.0×100mm $3,085.00 134255-30015 5 µm 120Å 30.0×150mm $3,910.00 134255-30025 5 µm 120Å 30.0×250mm $5,330.00 134259-7825 10 µm 120Å 7.8×250mm $910.00 134259-10010 10 µm 120Å 10.0×100mm $690.00 134259-10015 10 µm 120Å 10.0×150mm $930.00 134259-10025 10 µm 120Å 10.0×250mm $1,265.00 134259-21201 * 10 µm 120Å 21.2×10mm $305.00 134259-21205 10 µm 120Å 21.2×50mm $1,045.00 134259-21210 10 µm 120Å 21.2×100mm $1,625.00 134259-21215 10 µm 120Å 21.2×150mm $1,865.00 134259-21225 10 µm 120Å 21.2×250mm $2,200.00 134259-21230 10 µm 120Å 21.2×300mm Inquire 134259-30005 10 µm 120Å 30.0×50mm $2,040.00 134259-30010 10 µm 120Å 30.0×100mm $2,475.00 134259-30015 10 µm 120Å 30.0×150mm $3,140.00 134259-30025 10 µm 120Å 30.0×250mm $4,265.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-21201 Price: $175.00/EA (for 21.2×10mm guard cartridge) Sepax Polar-Imidazole Part Number Particle Size Pore Size ID×Length Price 135335-7815 5 µm 120Å 7.8×150mm $910.00 135335-7825 5 µm 120Å 7.8×250mm $1,040.00 135335-10015 5 µm 120Å 10.0×150mm $1,045.00 135335-10025 5 µm 120Å 10.0×250mm $1,490.00 135335-21201 * 5 µm 120Å 21.2×10mm $325.00 135335-21205 5 µm 120Å 21.2×50mm $1,515.00 135335-21210 5 µm 120Å 21.2×100mm $2,040.00 135335-21215 5 µm 120Å 21.2×150mm $2,305.00 135335-21225 5 µm 120Å 21.2×250mm $2,920.00 135335-21230 5 µm 120Å 21.2×300mm Inquire 135335-30005 5 µm 120Å 30.0×50mm $2,530.00 135335-30010 5 µm 120Å 30.0×100mm $3,085.00 135335-30015 5 µm 120Å 30.0×150mm $3,910.00 135335-30025 5 µm 120Å 30.0×250mm $5,330.00 135339-7825 10 µm 120Å 7.8×250mm $910.00 135339-10010 10 µm 120Å 10.0×100mm $690.00 135339-10015 10 µm 120Å 10.0×150mm $930.00 135339-10025 10 µm 120Å 10.0×250mm $1,265.00 135339-21201 * 10 µm 120Å 21.2×10mm $305.00 135339-21205 10 µm 120Å 21.2×50mm $1,045.00 135339-21210 10 µm 120Å 21.2×100mm $1,625.00 135339-21215 10 µm 120Å 21.2×150mm $1,865.00 135339-21225 10 µm 120Å 21.2×250mm $2,200.00 135339-21230 10 µm 120Å 21.2×300mm Inquire 135339-30005 10 µm 120Å 30.0×50mm $2,040.00 135339-30010 10 µm 120Å 30.0×100mm $2,475.00 135339-30015 10 µm 120Å 30.0×150mm $3,140.00 135339-30025 10 µm 120Å 30.0×250mm $4,265.00 * Guard cartridge holder needed. Guard cartridge holder P/N#: 102000-21201 Price: $175.00/EA (for 21.2×10mm guard cartridge)

Analytical Polar-Silica Polar-100 Polar-Diol Polar-Pyridine Polar-Imidazole Prep/Semi-prep Polar-Silica Polar-100 Polar-Diol Polar-Pyridine Polar-Imidazole