Sepax GP-C8 Columns
| Description | Packing | Characteristics | Application | Order Info | Downloads |
|
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
| Silica: | Sperical, high purity (<10 ppm metals) |
|---|
| Pore size: | 120 Å |
|---|
| Particle size: | 3, 5, and 10 µm |
|---|
| Pore volume: | 1.0 ml/g |
|---|
| Surface area: | 300 m²/g |
|---|
| Phase structure: | Monomeric and fully endcapped |
|---|
| % Carbon: | 11.0% |
|---|
- Highly controlled chemistry of monolayer formation and end-capping
- Extremely high column-to-column reproducibility
- High selectivity and efficiency for separations
- Full coverage bonded silica packing to achieve the exceptionally high stability
- Suitable for separations of acidic, neutral and basic organic compounds, such as pharmaceuticals, peptides, and organic acids
|
|
|
| Part Number | Particle Size | Pore Size | ID×Length | |
|---|
| | 107081-2103 | 1.8 µm | 120 Å | 2.1×30mm | | | 107081-2105 | 1.8 µm | 120 Å | 2.1×50mm | | | 107081-2110 | 1.8 µm | 120 Å | 2.1×100mm | | | 107081-2115 | 1.8 µm | 120 Å | 2.1×150mm | | | 107081-3003 | 1.8 µm | 120 Å | 3.0×30mm | | | 107081-3005 | 1.8 µm | 120 Å | 3.0×50mm | | | 107081-3010 | 1.8 µm | 120 Å | 3.0×100mm | | | 107081-3015 | 1.8 µm | 120 Å | 3.0×150mm | | | 107081-4603 | 1.8 µm | 120 Å | 4.6×30mm | | | 107081-4605 | 1.8 µm | 120 Å | 4.6×50mm | | | 107081-4610 | 1.8 µm | 120 Å | 4.6×100mm | | | 107081-4615 | 1.8 µm | 120 Å | 4.6×150mm | |
| Part Number | Particle Size | Pore Size | ID×Length | |
|---|
| | 107082-2103 | 2.2 µm | 120 Å | 2.1×30mm | | | 107082-2105 | 2.2 µm | 120 Å | 2.1×50mm | | | 107082-2110 | 2.2 µm | 120 Å | 2.1×100mm | | | 107082-2115 | 2.2 µm | 120 Å | 2.1×150mm | | | 107082-3003 | 2.2 µm | 120 Å | 3.0×30mm | | | 107082-3005 | 2.2 µm | 120 Å | 3.0×50mm | | | 107082-3010 | 2.2 µm | 120 Å | 3.0×100mm | | | 107082-3015 | 2.2 µm | 120 Å | 3.0×150mm | | | 107082-4603 | 2.2 µm | 120 Å | 4.6×30mm | | | 107082-4605 | 2.2 µm | 120 Å | 4.6×50mm | | | 107082-4610 | 2.2 µm | 120 Å | 4.6×100mm | | | 107082-4615 | 2.2 µm | 120 Å | 4.6×150mm | |
| Part Number | Particle Size | Pore Size | ID×Length | |
|---|
| | 107083-2001 [1] | 3 µm | 120 Å | 2.0×10mm | | | 107083-2001C [2] | 3 µm | 120 Å | 2.0×10mm | | | 107083-2103 | 3 µm | 120 Å | 2.1×30mm | | | 107083-2105 | 3 µm | 120 Å | 2.1×50mm | | | 107083-2110 | 3 µm | 120 Å | 2.1×100mm | | | 107083-2115 | 3 µm | 120 Å | 2.1×150mm | | | 107083-2125 | 3 µm | 120 Å | 2.1×250mm | | | 107083-3003 | 3 µm | 120 Å | 3.0×30mm | | | 107083-3005 | 3 µm | 120 Å | 3.0×50mm | | | 107083-3010 | 3 µm | 120 Å | 3.0×100mm | | | 107083-3015 | 3 µm | 120 Å | 3.0×150mm | | | 107083-3025 | 3 µm | 120 Å | 3.0×250mm | | | 107083-4001 [1] | 3 µm | 120 Å | 4.0×10mm | | | 107083-4001C [2] | 3 µm | 120 Å | 4.0×10mm | | | 107083-4603 | 3 µm | 120 Å | 4.6×30mm | | | 107083-4605 | 3 µm | 120 Å | 4.6×50mm | | | 107083-4610 | 3 µm | 120 Å | 4.6×100mm | | | 107083-4615 | 3 µm | 120 Å | 4.6×150mm | | | 107083-4625 | 3 µm | 120 Å | 4.6×250mm | |
[1]: Guard Cartridge only.
[2]: Guard Cartridge with holder (Part number ended with "C").
Precolumn Filters (Alternative choice for Guard Cartridge)
P/N#: 102000-P355 (2 µm PEEK frit), $65.00/ea
- for column with particle size 5 µm and 10 µm.
P/N#: 102000-P356 (0.5 µm PEEK frit), $65.00/ea
- for column with particle size 3 µm, or less than 3 µm.
PEEK Refill Frits (For Precolumn Filter)
P/N#: 102001-P355, 2 µm, 5 units/pk, $100/pk
P/N#: 102001-P356, 0.5 µm, 5 units/pk, $100/pk
| Part Number | Particle Size | Pore Size | ID×Length | |
|---|
| | 107085-2001 [1] | 5 µm | 120 Å | 2.0×10mm | | | 107085-2001C [2] | 5 µm | 120 Å | 2.0×10mm | | | 107085-2103 | 5 µm | 120 Å | 2.1×30mm | | | 107085-2105 | 5 µm | 120 Å | 2.1×50mm | | | 107085-2110 | 5 µm | 120 Å | 2.1×100mm | | | 107085-2115 | 5 µm | 120 Å | 2.1×150mm | | | 107085-2125 | 5 µm | 120 Å | 2.1×250mm | | | 107085-3003 | 5 µm | 120 Å | 3.0×30mm | | | 107085-3005 | 5 µm | 120 Å | 3.0×50mm | | | 107085-3010 | 5 µm | 120 Å | 3.0×100mm | | | 107085-3015 | 5 µm | 120 Å | 3.0×150mm | | | 107085-3025 | 5 µm | 120 Å | 3.0×250mm | | | 107085-4001 [1] | 5 µm | 120 Å | 4.0×10mm | | | 107085-4001C [2] | 5 µm | 120 Å | 4.0×10mm | | | 107085-4603 | 5 µm | 120 Å | 4.6×30mm | | | 107085-4605 | 5 µm | 120 Å | 4.6×50mm | | | 107085-4610 | 5 µm | 120 Å | 4.6×100mm | | | 107085-4615 | 5 µm | 120 Å | 4.6×150mm | | | 107085-4625 | 5 µm | 120 Å | 4.6×250mm | | | 107085-7815 | 5 µm | 120 Å | 7.8×150mm | | | 107085-7825 | 5 µm | 120 Å | 7.8×250mm | | | 107085-10005 | 5 µm | 120 Å | 10.0×50mm | | | 107085-10010 | 5 µm | 120 Å | 10.0×100mm | | | 107085-10015 | 5 µm | 120 Å | 10.0×150mm | | | 107085-10025 | 5 µm | 120 Å | 10.0×250mm | | | 107085-21201 [1] | 5 µm | 120 Å | 21.2×10mm | | | 107085-21205 | 5 µm | 120 Å | 21.2×50mm | | | 107085-21210 | 5 µm | 120 Å | 21.2×100mm | | | 107085-21215 | 5 µm | 120 Å | 21.2×150mm | | | 107085-21225 | 5 µm | 120 Å | 21.2×250mm | | | 107085-30005 | 5 µm | 120 Å | 30.0×50mm | | | 107085-30010 | 5 µm | 120 Å | 30.0×100mm | | | 107085-30015 | 5 µm | 120 Å | 30.0×150mm | | | 107085-30025 | 5 µm | 120 Å | 30.0×250mm | |
[1] Need guard cartridge holder
P/N#: 102000-21201
Price: $220.00/EA
(for 21.2×10mm guard cartridge)
| |
|
| Part Number | Particle Size | Pore Size | ID×Length | |
|---|
| | 107089-7815 | 10 µm | 120 Å | 7.8×150mm | | | 107089-7825 | 10 µm | 120 Å | 7.8×250mm | | | 107089-10005 | 10 µm | 120 Å | 10.0×50mm | | | 107089-10010 | 10 µm | 120 Å | 10.0×100mm | | | 107089-10015 | 10 µm | 120 Å | 10.0×150mm | | | 107089-10025 | 10 µm | 120 Å | 10.0×250mm | | | 107089-21205 | 10 µm | 120 Å | 21.2×50mm | | | 107089-21210 | 10 µm | 120 Å | 21.2×100mm | | | 107089-21215 | 10 µm | 120 Å | 21.2×150mm | | | 107089-21225 | 10 µm | 120 Å | 21.2×250mm | | | 107089-30005 | 10 µm | 120 Å | 30.0×50mm | | | 107089-30010 | 10 µm | 120 Å | 30.0×100mm | | | 107089-30015 | 10 µm | 120 Å | 30.0×150mm | | | 107089-30025 | 10 µm | 120 Å | 30.0×250mm | |
|
|
|
Copyright © 2011 Sepax Technologies, Inc. All Rights Reserved.
